Indostria mit-ivy metal Advanced Acrylic Latex Sealing Primer miaraka amin'ny hery manitsaka tena tsara
Application
Izy io dia manana firaiketam-po tsara amin'ny substrates vy sy primera miorina amin'ny rano, ary fananana ara-batana sy ara-mekanika tena tsara aorian'ny maina ny onjan'ny loko.
5. Ny sarimihetsika hoso-doko dia manana fikajiana hazavana tsara sy fitehirizana loko aorian'ny fanamainana.
Fampiharana natolotra Mety tsara ho an'ny fiarovana ny lakan-drano amin'ny kamio, kojakoja amin'ny milina, fitaovana indostrialy maivana, sns. Izay ilana fiarovana avo.
Data angon-drakitra Loko isan-karazany
Maina ambonin'ny tany (tsy fahaizan'ny 50%) 15 ℃ C <1h ； 25'C <0,5h
Maina maina (hamandoana 50%) 15'C <48h; 25 ° C <24h
Hits "kg.cm" 50
Rano (50 ± 5μm) sarimihetsika miloko 72h tsy mivonto, tsy manampy hilatsaka, tsy harafesina.
Hamafin'ny 0.3 (pendulo avo roa heny) fanamafisana ny horonan-tsarimihetsika mekanika (23 ± 3jμm)
Adhesion (Hegelian) Haavo 1
Fitsaboana ambonin'ny tany Ny haavon'ny fitaovana mifono dia tsy tokony hamandoana, solika, karbonina asidra ary lavenona.
Antsipiriany haingana
Ny vy misy hoditra oksida: ny fipoahana fipoahana na ny famaohana fasika toy ny fanodinana ka hatramin'ny haavon'ny Sa2.5, izay tsy azo anaovana famaohana fasika dia tokony hosorana milina na
Tsaboina simika mba hanala ny soroka tapaka mitsingevana rehetra.
Steel tsy misy hoditra oksida: sandblasted (shotblasted) mankany Sa2.5 na fitaovana elektrika mandeha amin'ny rivotra mankany St3.
Famolahana, fanapahana ny lelafo na fanitsiana ny afomanga amin'ny faritra andohalambo may: fikosoham-bary hatramin'ny haavon'ny St3.
Fitaovana fototra misy sarimihetsika hosodoko taloha: esory ny vongan-doko taloha sy ny harafesina ary ny fasika mankany St3 misy fitaovana fanamoriana rivotra na elektrika.
Ny fonosana hosodoko mahazatra dia azo ampiasaina amin'ny primera miorina amin'ny rano H902, na ampiasaina irery ho toy ny akanjo ambony amin'ny haingon-trano ankapobeny, na ampiasaina amin'ny karazana vokatra primer hafa (mila ampifanarahana amin'ny fanamarinana).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
